01/06/2023Borealis introduces the Bornewables™ line of Queo™, a range of plastomers and elastomers based on renewable feedstock. The introduction follows the International Sustainability and Carbon Certification (ISCC PLUS) of Borealis' production site for the Queo™ portfolio, in Geleen, the Netherlands.
11/05/2023Covestro AG offers a polycarbonate with a 90 percent recycled content of plastic from post-consumer waste (PCR) that can be used in consumer electronics, among other applications. The company is collaborating with Jabra on the Evolve2 headset and making progress on climate-neutral solutions through mass balancing.
27/04/2023The two companies BluCon Biotech GmbH and LG Chem Ltd entered into an investment agreement. Together, they plan to work on a novel process to convert lignocellulosic non-food raw materials into high-purity lactic acid.
17/02/2023The healthcare field produces lots of medical plastic waste. The idea of designing medical products with sustainability in mind is certainly not new. However, medical-grade plastic materials must meet strict regulatory requirements, often prompting the aspect of sustainability to take a back seat.
15/02/2023Plastic is a resource without which our life today would not be possible - and thanks to recycling, we can even use it several times over. However, we know from reports what can happen if the recycling process does not run properly: the plastic sometimes ends up in the sea. Getting it back into circulation from there and turning it into a usable product is not easy.
19/01/2023As early as 1908, textile engineer Jacques Brandenberger invented cellophane, a film made of natural polymers. However, the material was displaced by synthetic polymers with the development of numerous plastics. In the wake of the climate crisis, natural polymers are now coming back into focus as an alternative to fossil raw materials. traceless offers such an alternative.
08/12/2022A research team from the Fraunhofer Institute for Manufacturing Engineering and Automation IPA has succeeded inadditively manufacture sensors and other electronic devices in a single operation. As part of this research, the conductivity of thermoplastic elastomers (TPE) was tested to find out, for example, how best to incorporate electronic components.
26/10/2022The company tesa® supports the field of sustainability. The new tesa® 60412 packaging tape has a backing made of 70% recycled PET and a water-based acrylate adhesive system. The production process is completely solvent-free. Used PET products are recycled and used as raw material for the backing material.
11/10/2022The MAM company is accelerating circular economy measures in partnership with Borealis through the launch of MAM Original Pure pacifiers and packaging enabled by Borealis Bornewables™ portfolio of recyclable polyolefins. Upstream value chain partner Neste is the supplier of renewable feedstock Neste RE™ based on waste and residue streams for the manufacture of Bornewables polypropylene.
03/08/2022Naturbeads, a company that aims to replace plastic microbeads with sustainable alternatives, will expand its work. It has been helped by a recent £1.3 million (€1.5 million) funding round. Naturbeads has developed cellulose-based products that can be used in cosmetics, paints, coatings, additives for the oil and gas industry, packaging and composites.
27/07/2022Few, if any, materials can compete with plastics in terms of adaptability and versatility – many different material properties can be derived from the same basic chemistry, meaning that complex product assemblies can be made with a single type of plastic.
12/04/2022A research team at São Paulo State University (UNESP) made their bioplastic from type B bovine gelatin. Besides nanoclay the material is produced from clay and a nanoemulsion of black pepper essential oil.
04/04/2022MIT researchers has engineered a composite made mostly from cellulose nanocrystals mixed with a bit of synthetic polymer. The material could pave the way for sustainable plastics.
09/03/2022SIG's SIGNATURE FULL BARRIER packaging material is made from renewable, forest-based materials and responsible sources. The small amount of polymers used is certified. The Australian company Massel is now launching products in these SIG-Carton Packs.
01/03/2022University of Delaware researchers demonstrated that it is possible to efficiently turn industrially processed lignin into high-performance plastics, such as bio-based 3D-printing resins, and valuable chemicals. The research team replaced methanol, a traditional solvent used in lignin deconstruction, with glycerin so the process could be done at normal atmospheric pressure.
01/02/2022Researchers at Stockholm University have developed a resource-efficient method to produce new lignin-based materials that can be thermally reprocessed and used to substitute thermosetting resins and adhesives.
20/12/2021Once plastic products are used and discarded, they can linger in oceans and harming sea life. One potential solution, a biodegradable polymer called polylactide (PLA), has so far not fully lived up to its promise, showing little sign of breakdown once in seawater. In a new study, researchers set out to address this issue by incorporating RNA-inspired breaking points to the polymer.
29/11/2021The Center for Regenerative Design and Collaboration (CRDC) in Costa Rica aims to turn plastic waste into a valuable resource for the construction industry.
17/11/2021There is much discussion these days about the circular economy, and the means for incorporating plastics into this model. Recycling a used plastic bottle back into a clean, new bottle has some obvious environmental advantages. But a much more impactful model, in many cases, would involve turning tons of discarded plastics into products with a very long lifespan.
27/10/2021Researchers at the University of Göttingen have developed a new method to create environmentally friendly bioplastics from renewable raw materials.
22/10/2021Carbon dioxide is driving climate change. To combat it, emissions must be reduced. Fraunhofer researchers have developed an approach to use the climate gas as a raw material for plastics.
09/09/2021Once more, the IK initiative ERDE (Crop Plastics Recycling Germany) was able to significantly increase its collection volumes in 2020. At 543 fixed collection points and 1936 mobile collections, a total of 26,910 tons of agricultural films were collected and recycled.
16/08/2021Plastics offer many benefits to society and are widely used in our daily life. However, the production, processing and disposal of plastics are simply not sustainable, and pose a major global threat to the environment and human health. Eco-friendly processing of reusable and recyclable plastics derived from plant-based raw materials would be an ideal solution.
09/08/2021Due to the global efforts to meet sustainability standards, many countries are currently looking to replace concrete with wood in buildings. France, for example, will require that all new public buildings will be made from at least 50 percent wood or other sustainable materials starting in 2022.
03/08/2021Carbon dioxide is one of the main drivers of climate change – which means that we need to reduce Carbon dioxide emissions in the future. Fraunhofer researchers are highlighting a possible way to lower these emissions: They use the greenhouse gas as a raw material, for instance to produce plastics.
03/08/2021As consumers and corporations alike become more environmentally conscious, the chemical industry is working to find solutions to the plastic waste crisis. One idea is to use biodegradable polymers known as polyhydroxyalkanoates (PHA) as replacements for traditional plastic packaging and other materials.
27/07/2021Alongside many other industries, the automotive sector is also moving in the green direction. Electromobility is booming. However, plastics produced from non-renewable raw materials such as petroleum are also installed in e-cars. Röchling Automotive has recognized the need for bioplastics that meet the high requirements for automotive applications – and has developed BioBoom.
26/07/2021Bioplastics – biodegradable plastics made from biological substances rather than petroleum – can be created in a more economical and environmentally friendly way from the byproducts of corn stubble, grasses and mesquite agricultural production, according to a new study by a Texas A&M AgriLife Research scientist.
05/07/2021Researchers have created a plant-based, sustainable, scalable material that could replace single-use plastics in many consumer products.
01/07/2021In the scope of a future-oriented collaboration in the field of industrial production, the Fraunhofer-Gesellschaft is cooperating with the VSB – Technical University of Ostrava (VSB-TUO). The partners research and develop the potential offered by energy management technologies, artificial intelligence (AI) and intelligent production in industry.
15/06/2021Woodly Ltd., Finnish developer of wood based plastic, has raised EUR 3 million in growth funding for the commercialisation and internationalisation of their product innovation.
09/06/2021Instructions for the production of artificial cow horn. Almost 500 years old is the recipe for the production of artificial horn and thus currently the oldest known German recipe for plastic.
01/06/2021Soon, packaging for take-away foods might be completely based on local, sustainable materials instead of fossil-based products. In a new research project, a packaging solution based on upcycled grass fibres is being developed.
01/06/2021Catalytic process to efficiently convert polyethylene to jet fuel and high-value lubricants
18/03/2021People around the world want embrace sustainability – a new mindset that also affects the fashion industry. But how can you make shoes that have been made with lots of plastic in recent decades more sustainable? Covestro is a world-leading supplier of high-quality polyurethane and teamed up with the Brazilian shoe manufacturer Calçados Beira Rio to put its best foot forward and create a solution.