Special concrete additive made in Costa Rica

29/11/2021

The Center for Regenerative Design and Collaboration (CRDC) in Costa Rica aims to turn plastic waste into a valuable resource for the construction industry.
Read more

Elastic polymer that is both stiff and tough, resolves long-standing quandary

22/11/2021

Polymer science has made possible rubber tires, Teflon and Kevlar, plastic water bottles, nylon jackets among many other ubiquitous features of daily life.
Read more

Scientists develop films with tunable elongation and fracture for various uses

08/11/2021

Elastomers, or elastic polymers, materials with high elasticity, are widely used for applications in industries, such as automotive, manufacturing, and oil and gas.
Read more

Water meets cellulose: Environmentally friendly plastic made from hydroplastic polymers

27/10/2021

Researchers at the University of Göttingen have developed a new method to create environmentally friendly bioplastics from renewable raw materials. Prof. Dr. Kai Zhang, University Professor of Wood Technology and Wood Chemistry at the Georg-August University of Göttingen, explains the manufacturing process in the interview.
Read more

Greenhouse gases headed for sustainability: How CO2 is turning into plastic

22/10/2021

Carbon dioxide is driving climate change. To combat it, emissions must be reduced. Fraunhofer researchers have developed an approach to use the climate gas as a raw material for plastics.
Read more
Image: Roads are lifelines. © pexels-markus-spiske-967072

The road to the future? New ways with used plastics

30/09/2021

Viewing used plastic not as waste but as a material can reduce the problem of littered oceans. One promising approach is its use in road construction.
Read more

Microplastics from recyclable plastics on the rise

15/09/2021

Recyclable plastic has been recorded on popular beaches and urban watercourses in Adelaide, South Australia – highlighting the need for more efforts to remove and reuse all plastics from waste streams, particularly in urban areas.
Read more

New method developed to solve plastics sustainability problem

03/09/2021

Plastics sustainability has come a long way in recent years thanks in large part to scientific advances. But even as plastics become more and more environmentally friendly, the world continues to be polluted as many industries rely on them for their widely used products.
Read more

Material development: getting there faster with co-pilot AI

24/08/2021

General conditions for chemical and materials companies are changing rapidly. But the thorough research, development and commercialization of new materials can be lengthy. AI can accelerate this process.
Read more

Polymer enables tougher recyclable thermoplastics

23/08/2021

To synthesize plastic, small monomer molecules need to be strung together like beads in a necklace, creating long polymer chains. However, not all plastics – or their polymers – are created equal. The longer and stronger the polymer, the more durable the material. Cornell researchers took a middling monomer and, by using a special catalyst, they created a tougher polymer that can form long chains.
Read more

Visualizing stress in plastics

23/08/2021

A research team led by Prof. Dr. Michael Sommer and PD Dr. Michael Walter has succeeded in constructing a new dye molecule from the area of so-called mechanophores.
Read more

Eco-friendly plastic from cellulose and water

16/08/2021

Plastics offer many benefits to society and are widely used in our daily life. However, the production, processing and disposal of plastics are simply not sustainable, and pose a major global threat to the environment and human health. Eco-friendly processing of reusable and recyclable plastics derived from plant-based raw materials would be an ideal solution.
Read more

3D printing of multilayered materials for smart helmets

09/08/2021

A mechanical and aerospace engineering professor at The University of Texas at Arlington is developing advanced helmets to ensure that members of the military are as protected as possible from blasts and other types of attacks.
Read more

Bio-based coating for wood better than traditional synthetic options

09/08/2021

Due to the global efforts to meet sustainability standards, many countries are currently looking to replace concrete with wood in buildings. France, for example, will require that all new public buildings will be made from at least 50 percent wood or other sustainable materials starting in 2022.
Read more

Carbon dioxide as a raw material for plastics and other products

03/08/2021

Carbon dioxide is one of the main drivers of climate change – which means that we need to reduce Carbon dioxide emissions in the future. Fraunhofer researchers are highlighting a possible way to lower these emissions: They use the greenhouse gas as a raw material, for instance to produce plastics.
Read more

Can biodegradable polymers live up to the hype?

03/08/2021

As consumers and corporations alike become more environmentally conscious, the chemical industry is working to find solutions to the plastic waste crisis. One idea is to use biodegradable polymers known as polyhydroxyalkanoates (PHA) as replacements for traditional plastic packaging and other materials.
Read more

Röchling BioBoom: bioplastics make cars greener

27/07/2021

Alongside many other industries, the automotive sector is also moving in the green direction. Electromobility is booming. However, plastics produced from non-renewable raw materials such as petroleum are also installed in e-cars. Röchling Automotive has recognized the need for bioplastics that meet the high requirements for automotive applications – and has developed BioBoom.
Read more

'Plugging in' to produce environmentally friendly bioplastics

26/07/2021

Bioplastics – biodegradable plastics made from biological substances rather than petroleum – can be created in a more economical and environmentally friendly way from the byproducts of corn stubble, grasses and mesquite agricultural production, according to a new study by a Texas A&M AgriLife Research scientist.
Read more

Soft robots: smart elastomers are making the robots of the future more touchy-feely

19/07/2021

Imagine flexible surgical instruments that can twist and turn in all directions like miniature octopus arms, or how about large and powerful robot tentacles that can work closely and safely with human workers on production lines.
Read more
Image: An example of a replacement for single-use plastic in consumer products, produced by mimicking the properties of spider silk, one of the strongest materials; Copyright: Xampla

Vegan spider silk provides sustainable alternative to single-use plastics

05/07/2021

Researchers have created a plant-based, sustainable, scalable material that could replace single-use plastics in many consumer products.
Read more
Image: plastic granules and fir branches; Copyright: Woodly Ltd.

Woodly Ltd. has raised EUR 3 million in growth funding

15/06/2021

Woodly Ltd., Finnish developer of wood based plastic, has raised EUR 3 million in growth funding for the commercialisation and internationalisation of their product innovation.
Read more

New technology converts waste plastics to jet fuel in an hour

01/06/2021

Catalytic process to efficiently convert polyethylene to jet fuel and high-value lubricants
Read more

Grass replaces plastic in take-away food packaging

01/06/2021

Soon, packaging for take-away foods might be completely based on local, sustainable materials instead of fossil-based products. In a new research project, a packaging solution based on upcycled grass fibres is being developed.
Read more

Cleaning up the polluted edge of the world: Lindner and Comberplast recycle fishing nets

31/05/2021

Presented at K 2019 in Düsseldorf and now used to clean up the edge of the world: Lindner Recyclingtech’s Micromat 1500. Circular economy pioneer Comberplast has been using the machine to successfully shred old fishing nets and ropes collected from the coast of Patagonia.
Read more

Fire-resistant and bio-based fiber-reinforced composites for structural lightweight design in ships

24/05/2021

As lightweight construction materials, fiber-reinforced polymers have the potential to improve the ecological footprint of ships. If the fibers and plastic matrix are based on renewable raw materials, the ecological footprint can be further reduced. Integrating these materials as structural components is not state of the art and requires new concepts in shipbuilding.
Read more

New process makes 'biodegradable' plastics truly compostable

11/05/2021

Most compostable plastics, made primarily of the polyester known as polylactic acid end up in landfills and last as long as forever plastics. University of California scientists have now invented a way to make these compostable plastics break down more easily, with just heat and water, within a few weeks, solving a problem that has flummoxed the plastics industry and environmentalists.
Read more

Plastic components with longer service life

10/05/2021

23 percent of global energy consumption can be attributed to friction losses. In the case of plastics, reduced friction can also reduce microplastics in the environment. With the development of microcapsules filled with liquid lubricants for plastics, the Potsdam Fraunhofer Institute for Applied Polymer Research IAP and the Plastics Center SKZ in Würzburg are supporting these goals.
Read more

Earth Day 2021: plastics industry vs. climate change

16/04/2021

April 22 is Earth Day. "Restore Our Earth" is the international motto of the action day in 2021. The plastics industry in particular can and must do its part to end environmental pollution and restore the earth to health. Since it was founded over 50 years ago, Earth Day has grown to become a worldwide environmental action day in around 200 countries.
Read more

New biodegradable polyurethane foams are developed from wheat straw

01/04/2021

Every year around 734 million tons of wheat straw are produced worldwide, a large amount of waste, which is cheap and has had no well-defined use until now. Recently, research groups at the University of Córdoba have been able to give a new use to this agricultural excess material, by using it as the foundation in order to manufacture polyurethane foams.
Read more
Graphic: Intestinal bacteria

Sustainable nylon production made possible by bacteria discovery

24/08/2020

Nylon manufacture could be revolutionised by the discovery that bacteria can make a key chemical involved in the process, without emitting harmful greenhouse gases.
Read more

Polymere ink of the future in printed electronics

19/06/2020

A research group led by Simone Fabiano at the Laboratory of Organic Electronics, Linköping University, has created an organic material with superb conductivity that doesn't need to be doped. They have achieved this by mixing two polymers with different properties.
Read more

Plastics make the mannequins’ world go round!

22/05/2020

Display mannequin manufacturers have not only been creative in terms of design. Resource-saving operations have also ranked very high on their agendas for years. There has been in-depth research in developing materials and processes and plastics continue to play a leading role.
Read more

Antiviral and antimicrobial additive developed for face masks

22/05/2020

Wearing a fase mask can significantly reduce the range of viruses that are coughed up. This is the conclusion reached by scientists from the university in Edinburgh, Scotland. Nevertheless, the mask does not protect against infection per se. An Israeli company has now developed an additive wih an antiviral effect that can be applied to the mask.
Read more
Carbon Inc.’s Continuous Liquid Interface Production™, © Carbon Inc.

A look at the shifting trends in additive manufacturing

22/05/2020

Read more

Better drinking water thanks to plastics

20/05/2020

Around 2.2 billion people do not have an access to clean drinking water, although two thirds of the earth is covered with water. However, more than 97 percent of it is inedible salt water. So drinking water is a very rare commodity on earth. However, drinking water can be obtained from salt water. Polymeres could help.
Read more

Water replaces toxins: Green production of plastics

21/04/2020

Although organic plastics are not harmful to the environment themselves, toxic substances are often used during their synthesis. TU Wien shows - there is another way.
Read more
Close-up foil

Looking for new packaging materials

25/03/2020

In a joint research project, the Fraunhofer Institute for Microstructure of Materials and Systems IMWS and the technical film producer POLIFILM Extrusion GmbH, are working to engineer biopolymer-based films for food packaging. In this project, the specialists relied on chitosan coatings to increase the resistance of food to microbiological impacts.
Read more

"Harvesting" body heat more efficiently with superrubber

12/02/2020

North Carolina State University engineers have demonstrated a flexible device that harvests the heat energy from the human body to monitor health. The device is more efficient than other flexible harvesters that use body heat as the sole energy source.
Read more

Unique polymer fibers: Light, strong, and tough

19/12/2019

Strong and tough yet as light as a feather -- materials with this exceptional combination of properties are urgently needed in many industrial sectors and in medicine, as well as being of great interest for scientific research. A research team from the University of Bayreuth has developed polymer fibers with precisely these properties.
Read more

ABOUT US

CONTACT

NEWSLETTER