07/12/2022Something is only impossible as long as you don't try. Covestro has developed the new Arfinio manufacturing technology, the first application to allow reaction injection molding of aliphatic polyurethanes. Joan Miquel Garcia Martinez explains in an interview why this was previously considered unthinkable and why it now works after all.
22/11/2022With its new business unit "Fibres and Textiles", the EREMA Group is intensifying the development of recycling solutions focusing on PET fibre materials that are produced in fibre production and in further processing steps. In a dedicated fiber pilot plant, a cross-company team is working on recycling solutions for fiber-to-fiber applications.
21/11/2022The company Covestro AG has developed a new heat-resistant coating for use on mono-material stand-up pouches made with SABIC's PE/BOPE technology. The coating facilitates high-speed industrial production of stand-up pouches made with SABIC® BOPE biaxially oriented polyethylene. The new solution enables simpler, single-stream recycling.
15/11/2022Sumitomo (SHI) Demag is focusing on sustainable development in the field of machinery and equipment. The new innovation in the form of an all-electric injection molding machine called IntElect2 220/660-1100 with low scrap rates and thanks to platen parallelism is an example of the plan. It is used to produce a wallbox using the IMD process.
04/11/2022Real-time visualisation of process and machine data holds great potential for the circular economy as a whole and for recycling processes in particular. At K 2022 EREMA launched "PredictOn:Drive", a predictive maintenance application for its recycling machines.
02/11/2022The demand for high-quality recyclates has exceeded the supply on the market for years. So far, too much high-quality plastic is still being burned as waste instead of being recycled. The Berlin-based start-up Circleback wants to change that by setting up a deposit system for plastic packaging from the bathroom.
28/10/2022After about 25 years, the rotor blades of a wind turbine have usually had their day. But what happens to them then? Together with the Institute for Energy and Circular Economy (IEkrW), the Fraunhofer Institute for Wind Energy Systems (IWES) is developing concepts in a project that should enable rotor blades to be better recycled and reused.
26.10.2022Steinert.view® is a flexible and reliable monitoring solution for STEINERT sensor-based sorting machines. Performance data collected is visualized in a web app so that operators can see at a glance whether machines are currently producing, whether there are changes in production, or whether there is potential for optimization.
13/10/2022The set-up for K 2022 at the Düsseldorf Trade Fair is in full swing. The trade fair's logistics team is making sure that everything runs smoothly. Werner Arnold, Team Manager Logistics, explains in an interview all the things that need to be taken into account until all the halls at K are filled.
11/10/2022The filling of a mold determines the quality of the resulting molded part. But what if insight into the filling process of particle foams is not available and thus control is lacking at this crucial point in the production process? A new transparent experimental mold made of acrylic glass developed by Neue Materialien Bayreuth (NMB) has put an end to this dilemma.
04/10/2022Communication is key, and this also applies to machines, since the ability of machines to communicate has economic advantages. However, this first requires a common linguistic basis, because then the machines can be used particularly efficiently.
27/09/2022Oliver Fuss has completed not one, but two apprenticeships at Arburg: first an apprenticeship as a mechatronics technician and then as a process mechanic for plastics and rubber technology. Now he works in the turnkey division, where fully automated manufacturing cells are designed and built.
13/09/2022What's old is far from bad. This also applies to machines - however, they are often not capable of communicating. Yet it is precisely this ability that is of interest when it comes to evaluating data or correcting errors. Injection molding machine manufacturer Steinl has found a way to connect even older machines to a communication network.
30/08/2022Successful business means sustainable business. Because according to KraussMaffei, sustainability has both ecological and economic advantages. Recently, the company reaffirmed its goal of being climate-neutral by 2030. Its strategy includes recycling solutions, energy-efficient construction and heating, and sustainable product development.
25/08/2022Individualization is the trend. In the plastics industry, too, more and more individualized machines are coming onto the market. Of course, these machines also require individualized manuals with instructions tailored specifically to them. However, this is not yet a reality today. The AdaptAR project wants to change that – with the help of Augmented Reality and an app.
16/08/2022In recycling, plastics are usually sorted, cleaned, ground, compounded and regranulated to be reprocessed as regranulate. The material must therefore be melted twice – first for granulation, then for injection moulding. ENGEL has now developed a process in which plastic waste can be processed as flakes in injection moulding directly after grinding. This makes it highly energy-efficient.
09/08/2022Twenty-year-old Yannick Herzog trained as an electronics technician for automation technology at Arburg and now works in the company's printed circuit board production. Since August 2021, he has been responsible for SPI and AOI for quality control of printed and assembled PCBs, respectively, in a production line. These are used in the control systems of the Arburg machines.
02/08/2022Those who work meticulously to design a product can hardly await the day they can hold the finished item in their hands. Alpla is a company headquartered in Hard, Austria, that speeds up this process. Customers can convert their ideas into reality and ideally leave Alpla's STUDIOa with a prototype in hand.
25/07/2022The KraussMaffei company confirms a sustainable corporate strategy: Climate neutrality in eight years. The consistent focus is on Circular Economy. One of the largest roof-mounted photovoltaic systems in Europe is currently being built at the new main plant in Parsdorf.
12/07/2022At the heart of any modern robot is a gearbox. Now imagine a robot with its "heart" made of plastic. It’s simply marvelous. But that’s not the only benefit users can expect from the new cobot (collaborative robot) by igus: the device is also lightweight, portable, and affordable.
08/07/2022The pandemic. Supply chain ruptures. The Great Resignation. China trade tensions. Climate change and extreme weather events. Soaring inflation. Stock market volatility. The war in Ukraine. Seldom in our lifetimes have we experienced such an extended period of disruption and uncertainty.
01/07/2022In the "OSFIT" (One Shot Fully Integrated Thermoplastic Frame) project, automated processes were developed to reduce both the time required and the complexity of the assembly and joining steps in aircraft production.
29/06/2022Thermoforming is a process that requires various tool systems. Unfortunately, if the latter originate from different manufacturers, they often cannot be used together in one system. Illig took on the challenge and came up with a successful solution.
21/06/2022The EU's Circular Economy Action Plan stipulates that by 2050 all plastic packaging must be completely recyclable and consist of at least 70 percent recycled material. The majority of plastic waste still ends up in landfills or incinerators – in the worst case, in the environment.
13/06/2022The COVID-19 pandemic put acrylic (transparent) shields, better known as "sneeze guards," in high demand in their role as protective barriers. However, they pose a major challenge for recycling companies at the end of the product life cycle since the different plastics must be separated and sorted to maintain purity and facilitate reuse.
06/06/2022Röchling Industrial has developed a new glass fiber-reinforced plastic Durostone® CR. "CR" stands for Compact & Resilient. Compared to conventional fiber-reinforced composites, Durostone® CR has a high dielectric strength and a high partial discharge insertion stress.
06/06/2022Researchers at the Technical University of Kaiserslautern have developed intelligent software that can adjust parameters such as temperature and printing speed during printing.
23/05/2022In the HITCOMP project (High Temperature Characterization and Modelling of Thermoplastic Composites), thermoplastic materials were investigated in the aerospace sector. The researchers concluded that thermoplastic-based components are more efficient than thermosetting plastic composites in terms of their thermal properties.
19/05/2022Innovations always emerge from something existing, something tried and tested. Approaching them in terms of their content requires a look at the fundamentals. This is also true for the question of how carbon dioxide (CO2) from exhaust gases can be used for the production of plastics.
17/05/2022The more complex carbon fibre reinforced plastics (CFRP) components are, the more difficult they are to examine. As a rule, the robot-assisted examination systems required for this are therefore designed for a limited range of components, which can hardly be used for examining other components.
16/05/2022The newly developed laser-drilled microplastic filter filters out tiny microplastic particles in wastewater. As part of the "SimConDrill" project, 59 million holes with a diameter of ten micrometers were drilled into a filter sheet using a multi-beam process. The process was developed at the Fraunhofer Institute for Laser Technology ILT.
06/05/2022At 16, did you already know where you wanted to go on your professional journey? With the range of choices available to young people today, it can be difficult to make a decision at first glance. That's why it's beneficial to be taken by the hand and introduced to different professions. Wentus GmbH from Höxter sets a good example.
29/04/2022When the first plastic was developed 150 years ago, it was a miracle for people at the time. Around 1950, the material contributed significantly to the economic miracle of the post-war period. Today, in view of the climate crisis, little is left of this image. In its exhibition "Plastic. Remaking Our World", the Vitra Design Museum wants to show how plastic can contribute to solving problems.
25/04/2022We all remember the beginning of the Corona pandemic: the demand for medical protective clothing increased rapidly, leading to supply bottlenecks. Although the situation has calmed down again, the dependence of companies on global supply chains was exposed. Reifenhäuser is now specifically addressing this problem with its new Ultrathin Coating process.
11/04/2022Twelve Boeing 777-300ERs will gradually be fitted by SWISS with the riblet films developed by Lufthansa Technik and BASF. The reduced frictional resistance makes the sub-fleet more economical and lower in emissions, thus reducing the environmental footprint.
04/04/2022The WITTMANN Group has changed its brand strategy and is aiming for a one-brand strategy instead of the two-brand strategy.
30/03/2022The Montreal-based World Design Organization has named a mobile, solar-powered, plastic-waste upcycling platform as the winner of its World Design Impact Prize™ for 2021.
25/03/2022It looks and sounds like a standard trombone - but is actually lightweight and made of carbon fiber rather than brass metal. To craft the musical instrument using this raw material, additive manufacturing is the right application for success: the process provides great options to manufacture the relevant molds used to build the instrument.
04/03/2022Knowledge is power – this also applies to the plastics industry. But training courses cost time and tie up participants, although they are actually needed elsewhere. So that companies do not have to do without employees for entire days during such training courses, the SKZ has developed the eCampus together with Hanser Verlag.
21/02/2022With a new technology it is possible to analyse and categorise the type of plastic by using a hyperspectral camera in the infrared area and machine learning. The technology makes it possible to separate plastics based on a purer chemical composition than is possible today, and this opens up for completely new opportunities to recycle plastics.
16/02/2022How can plastic packaging become intelligent? By providing them with digital watermarks that can be read by sorting systems and thus simplify the sorting process. The fact that this technology works was proven in the pioneering HolyGrail 1.0 project with a proof of concept.
14/02/2022With a new method West Virginia University engineers upcycle single-use plastic packaging into petrochemicals. The produced ethylene and BTX aromatics from plastic upcycling can be used as feedstocks to re-make plastics.
09/02/2022Bright red bodywork, a white steering wheel and a lot of noise when driving: That's what the Bobby-Car is all about. Almost everyone knows it and almost everyone has owned one. Or still does.
07/02/2022New AI-based process optimisation tools have been developed specifically targeting injection moulding machines. Plus10 and the SKZ performed a series of thorough AI pilot tests on Sumitomo (SHI) Demag machines.
20/01/2022President, GN Thermoforming Equipment Co.
20/01/2022The aim of the project ReIn-E project is to develop designs and sustainable materials to enable the recycling of the components.
19/01/2022Petchem Business Unit Director, MOL Hungarian Oil and Gas Company Plc.
17/01/2022More than 300 million tons of plastic waste are produced annually, which causes serious environmental issues. Consequently, most plastic waste ends up in either a landfill or the ocean. A significant number of plastics break down into microplastics, which are ingested by fish and other marine life causing havoc to marine ecosystems.
07/01/2022The Pöppelmann Research Week on the topic of "Plastics and Recycling" brought young people closer to the topics of plastics and recycling.
15/12/2021Plastic is an important material and a virtually irreplaceable component in many products. However, the breakdown and disposal of plastics after use also goes along with microplastics. At the end of its life cycle, plastic material first ends up in the environment and then comes back to us: a study has found that we ingest about five grams of plastic every week without realizing it.
08/12/2021Head of Research & Development, Reifenhäuser Reiloy
09/11/2021One way to address the shortage of personnel in the plastics industry is to hire lateral hires – but that requires a good continuing education program. But especially in production, this is usually not so easy to do without taking the employee away from his or her job - which results in production coming to a standstill.
03/11/2021It's no secret, and yet the numbers are shocking: less than one-tenth of the total amount of plastic produced to date has been recycled. Currently, the rate is 14 percent worldwide. A full 32 percent ends up in the environment. This urgently needs to change – which is what the Australian company PlasTech Recycling Limited thought as well. And so they developed an innovative technology.
22/10/2021Carbon dioxide is driving climate change. To combat it, emissions must be reduced. Fraunhofer researchers have developed an approach to use the climate gas as a raw material for plastics.
18/10/2021New research from Cornell University aims to ease the process of chemical recycling – an emerging industry that could turn waste products back into natural resources by physically breaking plastic down into the smaller molecules it was originally produced from.
12/10/2021There is a desperate need for skilled workers in the plastics industry. Yet the industry has a lot to offer. Reifenhäuser GmbH also proves this with its diverse range of training programs.
12/10/2021Sustainability is an important issue in business and industry these days. Many companies recognize the need to find the best possible climate-neutral solutions for manufacturing their products and reduce their output of pollutants. This means they are looking for manufacturing options that do not require the use of fossil raw materials.
28/09/2021Arburg is launching a new series for production-efficient multi-component injection moulding: the Allrounder More, with its particularly flexible configuration, can now be perfectly adapted to specific customer and market requirements. The machines offer increased space for larger moulds, greater modularity during assembly, and numerous optimised features for easy use and simple maintenance.
14/09/2021The Fraunhofer IPT has teamed up with BelloSeno GmbH to study biocompatible implants that are made using 3D printing. Kai Janning from the Fraunhofer IPT describes the conditions a medical device production facility must meet and reveals the latest successes of the researchers.
23/08/2021There are many aspects and forms of digitalization in manufacturing, ranging from Industry 4.0, the Internet of Things (IoT), artificial intelligence and additive manufacturing, to augmented and virtual reality, 5G connectivity, mobile apps, blockchain technology, and more.
16/08/2021Precisely because plastic is such a versatile material, future generations must also be taught how to use and recycle it responsibly.
30/07/2021What can be recycled, and what can't? Sorting waste is a challenge – for both people and machines. TOMRA, pioneer in this field has introduced its new generation AUTOSORT in 2020 under the motto "Symphony of all sorts". This is intended to take the plastics industry a big step further towards sustainability.
19/07/2021Imagine flexible surgical instruments that can twist and turn in all directions like miniature octopus arms, or how about large and powerful robot tentacles that can work closely and safely with human workers on production lines.
14/07/2021Plastic and its diversity can exert a fascination. This was also the case for Nele Zerhusen. In her bachelor's thesis, she later researched how plastics can be further developed for the benefit of the environment.