22.05.2023Plastics contribute to climate protection. As fibre-reinforced plastics for wind turbines or films for solar cells, they already play an important role in power generation from renewable energies. But the conventional solutions are not equally suitable for every area of application. This is where a new type of material comes into play that was developed at Saarland University.
18.05.2023A research team at the University of Leipzig has further improved the functioning of an enzyme that can degrade PET plastic. Through computer simulations and experiments, they were able to rationally improve the enzyme and are now working on developing the third generation of the enzyme.
11.05.2023Colorado State University polymer chemists have created a synthetic Polyhydroxyalkanoates (PHA) platform. These newly designed PHAs are mechanically tough, even outperforming the two most common commodity plastics. Among other things, this is intended to address the thermal instability of conventional PHAs and is a major step toward sustainability.
04.05.2023Researchers at the Fraunhofer Institute have developed an environmentally friendly process to remove fragrances from plastic packaging. The process is based on pressurized water extraction and removes the fragrance limonene from HDPE packaging. By evaluating the data using machine learning methods, it was possible to optimize the extraction parameters.
27.04.2023The two companies BluCon Biotech GmbH and LG Chem Ltd entered into an investment agreement. Together, they plan to work on a novel process to convert lignocellulosic non-food raw materials into high-purity lactic acid.
27.04.2023The lack of standardized analytical procedures for microplastic data has led to significant deviations, especially for small particles with high hazard potential. Researchers from the University of Bayreuth and the Alfred Wegener Institute have compared two automated analysis procedures and called for standardization to improve the comparability of data.
05.04.2023With the "Product Carbon Footprint Engine" developed by LANXESS, the CO2 footprint can be calculated automatically for the Group's products. With this innovation, the speciality chemicals company aims to help its customers achieve their sustainability goals.
05.04.2023Boston College chemists have developed an approach that uses light to transform lignin into sustainable plastics. The findings advance a potential strategy for the waste-free system of polymer manufacture and re-use known as the circular plastic economy.
20.03.2023The two companies LyondellBasell and KIRKBI signed an agreement to make an investment in the company APK. APK has developed the unique solvent-based Newcycling® process, which separates the different polymers of multi-layer packaging materials and produces recycled materials with a high degree of purity suitable for new packaging materials.
13.03.2023A research team from the University of Greifswald, together with scientists from Covestro AG, has identified enzymes capable of degrading polyurethanes and polyvinyl alcohol. The research helps to establish a sustainable and environmentally-friendly process to recycle these polymers.
08.03.2023We encounter high-density polyethylene (HDPE) every day, for example as detergent packaging or films. HDPE is particularly stable and resistant. In terms of sustainability, however, it still has a long way to go, because its high stability is often accompanied by poor degradability.
01.03.2023Specialty chemicals company LANXESS and French energy group TotalEnergies have entered into a cooperation on the supply of biocircular styrene. Unlike conventional styrene, the raw material used by TotalEnergies is based on tall oil, which is derived from a tree resin and is a by-product of pulp production.
14.02.2023Chemical companies Covestro and LANXESS are cooperating in the energy-intensive production of basic chemicals at their Lower Rhine sites in Germany and make them more climate friendly. LANXESS procures chlorine, caustic soda and hydrogen from the ISCC PLUS-certified sites of Covestro in Leverkusen and Krefeld-Uerdingen.
14.02.2023"Materials informatics (MI), a new branch of materials research that combines materials data with data science, is gaining traction," said co-corresponding author Yoshihiro Hayashi, assistant professor, Institute of Statistical Mathematics in the Research Organization of Information and Science (ROIS).
06.02.2023Fraunhofer researchers, in collab with industrial partners, have achieved initial success in the development of bio-based flame retardants in bioplastics. In the future, it could therefore be possible to utilize plastics in electronics and electrical engineering that consist of 100% bio-based materials. Processing was tested by means of compounding, injection molding and additive manufacturing.
02.02.2023University of California, Riverside, scientists have moved a step closer to finding a use for the hundreds of millions of tons of plastic waste produced every year that often winds up clogging streams and rivers and polluting our oceans.
23.01.2023Microorganisms populate nearly any habitat, no matter how hostile it is. Their great variety of survival strategies is of huge potential in biotechnology. Most of these organisms, however, are unknown, because they cannot be cultivated. To make better use of this "microbial dark matter", the KIT) has now developed a "sponge" made of porous, formable silicone.
03.01.2023Many raw materials deserve a second life, and especially in view of resource conservation and the circular economy, the reuse of raw materials is particularly important. Evonik shows how it's done: The company produces PA-12 elastomers from old tires.
19.12.2022Shoe insoles made of Elastollan®, BASF's thermoplastic polyurethane (TPU), offer a high degree of individualization freedom. The production of shoe insoles in 3D printing enables smooth transitions between soft and hard structures.
01.12.2022A research team at the University of Colorado Boulder has discovered how durable plastics used in the aerospace and microelectronics industries broken down into their most basic building blocks and then formed again into the same material. In the process, they do not lose their physical properties.
21.11.2022With the development of the first 100 percent recyclable FFP2 mask, the Austrian Grabher Group is taking an important step towards sustainability. The sustainable FFP2 masks made of polypropylene are not only fully recyclable, but also cause significantly fewer CO2 emissions during their manufacture than conventional protective masks.
26.10.2022Researchers at Queen's University Belfast have developed a plastic film that uses room light to kill viruses that land on its surface. The technology used to manufacture the film also ensures that it is degradable. This self-sterilizing film is inexpensive to produce, easy to scale and could be used for disposable aprons, tablecloths and curtains in hospitals.
21.10.2022A research team has investigated whether intended nanostructures formed by UV light could be the cause of yellowing of polyethylene. The result was that chiral chemical structures form on the surfaces of polyethylene films during exposure to UV light and are a possible cause of the yellow color of old plastics. These findings could help researchers develop plastic products that last longer.
21.10.2022A research team at Osaka Metropolitan University has succeeded in producing fumarate from pyruvate and CO2 through artificial photosynthesis. Fumarate can be used to produce biodegradable plastic such as polybutylene succinate. In this process, the carbon is stored in a compact, durable and solid form.
11.10.2022A research team led by Guoliang "Greg" Liu implemented the goal of making the current main method for recycling polystyrene profitable. By exposing the material to ultraviolet light and adding a chemical catalyst this method creates diphenylmethane (DPM), which has a high economic value. This new recycling method would create an incentive for polystyrene to be collected and recycled.
03.10.2022ARCUS plans to start up first commercial pyrolysis plant for mixed plastic waste in Germany and will supply the company BASF SE with pyrolysis oil. This will enable further expansion of BASF's ChemCyclingTM business. The Agreement foresees take-up of up to 100,000 tons of pyrolysis oil per year.
19.09.2022Covestro plans to set up its first dedicated mechanical recycling (MCR) plant for polycarbonates at its integrated site in Shanghai. The company also plans to convert an existing compounding facility in Thailand into a mechanical recycling plant.
12.09.2022The chemicals company LANXESS aims to make its upstream and downstream supply chains climate-neutral by 2050. In order to achieve the so-called Scope 3 targets, LANXESS has launched the Net Zero Value Chain Program. The focus is on sustainable raw materials, green logistics and climate-neutral products.
01.09.2022The BASF company is focusing on renewable energy in the field of electricity supply in the United States. BASF enables renewable energy projects by signing virtual power purchase agreements (VPPAs) totaling 250 MW. In addition, the amount of solar and wind energy in the grid offsets the energy supply of more than 20 production sites.
15.08.2022The Trinseo company has launched a new series entitled: ALTUGLAS™ R-Life Acrylics. This comprises chemically and mechanically recycled, reused and bio-based polymethyl methacrylate (PMMA) for cast and extruded sheets, resins and compounds.
15.08.2022The Borvida™ portfolio introduces sustainable base chemicals to Borealis' range of product offering. The range will initially be based on non-food waste biomass, and chemically-recycled waste. In the future it will also draw from atmospheric carbon capture. The traceability of the content will be based on Mass Balance, which is ISCC PLUS certified.
08.08.2022LyondellBasell (NYSE: LYB) is participating in the NEXTLOOPP initiative, which aims to produce circular recycled food-grade polypropylene (FGrPP) from used packaging. NEXTLOOPP is able to close the loop of polypropylene (PP) by means of a combination of cutting-edge technologies. Polypropylene is separated from the rest and the polymer is decontaminated.
25.07.2022After developing the first process inorganic catalyst to break down polyolefin plastics into molecules, a team led by Ames Laboratory scientists has now developed a strategy to accelerate the conversion without losing the desired products.The result is that larger platinum particles reacted more slowly with the long polymer chain, while the smaller ones reacted faster.
18.07.2022A Northwestern University research team used a new method to convert acetylene to ethylene, a widely used, highly valuable chemical that is an important component of plastics. They use a process similar to photosynthesis that is much less expensive and less energy intensive.
11.07.2022Scientists from EPFL's School of Basic Sciences have successfully developed a biomass-derived plastic. Similar to PET, it meets the criteria for replacing several current plastics while being more environmentally friendly.
01.07.2022In the Fraunhofer Cluster of Excellence Circular Plastics Economy (CCPE), the four Fraunhofer institutes are researching odor barrier skins for polymer compounds made from recycled materials. With special additives, odor barrier skins with a skin thickness of 0.25 mm can be effectively realized. The odor-contaminated plastic can be "packaged".
14.06.2022The company SABIC introduced LNP™ ELCRIN™ WF0061BiQ resin, a novel material that uses ocean-bound polyethylene terephthalate (PET) bottles as a feed stream for chemical upcycling into polybutylene terephthalate (PBT) resin. The company has added many different and innovative grades to the LNP ELCRIN iQ portfolio, including glass- and mineral-reinforced products and flame-retardant formulations.
01.06.2022Researchers at the University of Leipzig have discovered an enzyme that degrades PET plastic in a short time. The enzyme PHL7 is twice as active as the previous leader LCC. This should make biological recycling more cost-effective.
23.05.2022To convert plastic waste into hydrogen, researchers at the Technological University, Singapore (NTU Singapore) have developed a new method. The new method is based on pyrolysis, a high-temperature chemical process. The project is also investigating the potential of other new technologies for decentralized waste management.
19.05.2022Innovations always emerge from something existing, something tried and tested. Approaching them in terms of their content requires a look at the fundamentals. This is also true for the question of how carbon dioxide (CO2) from exhaust gases can be used for the production of plastics.
16.05.2022Researchers at Rice University have developed a technique to turn plastic waste into an effective carbon dioxide (CO2) sorbent for industry.
25.04.2022Scientists have characterized an enzyme that has the ability to degrade terephthalate (TPA), one of the chemical building blocks of the plastic polyethylene terephthalate (PET), which is used to make disposable beverage bottles, for example.
12.04.2022Researchers have identified a bacterial enzyme that can produce a new type of polysaccharide similar to the biopolymer chitin. The new molecule could be useful for drug delivery, tissue engineering and other biomedical applications. It is also biodegradable.
11.04.2022In order to remove odorous substances migrated in plastic waste and to obtain high-quality plastic recyclates, KREYENBORG has developed the new IR-FRESH® technology. In several steps the process can be used for regrind as well as for granulates.
24.03.2022The first trials on chemical recycling of mattresses by BASF and NEVEON were successful. BASF is developing a wet chemical recycling process for used mattresses made of flexible polyurethane. Mattress take-back pilot is an important step towards circular economy.
01.03.2022By modifying carbon-hydrogen bonds, chemists from the University of North Carolina at Chapel Hill transform plastic trash into tougher, stronger material. They started with plastic foam packaging used to protect electronics during shipping that otherwise ends up in landfills.
01.03.2022University of Delaware researchers demonstrated that it is possible to efficiently turn industrially processed lignin into high-performance plastics, such as bio-based 3D-printing resins, and valuable chemicals. The research team replaced methanol, a traditional solvent used in lignin deconstruction, with glycerin so the process could be done at normal atmospheric pressure.
21.02.2022To study how much plastic is trickling down on us from the atmosphere, Empa researcher Dominik Brunner, together with colleagues from Utrecht University and the Austrian Central Institute for Meteorology and Geophysics, have developed a chemical method that determines the contamination of the samples with a mass spectrometer.
01.02.2022Researchers at Stockholm University have developed a resource-efficient method to produce new lignin-based materials that can be thermally reprocessed and used to substitute thermosetting resins and adhesives.
20.01.2022Research by UNSW academics shows that special treatment of liquid resin used in 3D printing can cause the material to mend itself if it becomes damaged.
10.01.2022Researchers at the Department of Energy's Oak Ridge National Laboratory designed a novel polymer to bind and strengthen silica sand for binder jet additive manufacturing, a 3D-printing method used by industries for prototyping and part production.
13.12.2021Air Liquide and BASF are planning to develop the world's largest cross-border Carbon Capture and Storage value chain. The goal is to significantly reduce CO2 emissions at the industrial cluster in the port of Antwerp. The joint project has been selected for funding by the European Commission through its Innovation Fund, as one of the seven large-scale projects out of more than 300 applications.
01.12.2021As announced by the German Design Council, Covestro's CMF Aesthetics Toolkit will receive the German Design Award 2022 in the category "Excellent Product Design – Material and Surfaces." The toolkit is designed to inspire designers to explore the many aesthetic and functional possibilities of polycarbonate in the field of color, material and finish (CMF).
22.11.2021Polymer science has made possible rubber tires, Teflon and Kevlar, plastic water bottles, nylon jackets among many other ubiquitous features of daily life.
08.11.2021Two EPFL engineers have come up with a revolutionary new method for tackling plastic pollution by harnessing the inner workings of proteins. The result? A whole new way of looking at plastic recycling.
08.11.2021Polyurethane (PU) is one of the most versatile thermoset synthetic polymers which through careful choice of monomer and formulation, can be seen in a myriad of different forms ranging from rigid-, flexible and molded foams to adhesives and elastomers just to name a few.
08.11.2021Elastomers, or elastic polymers, materials with high elasticity, are widely used for applications in industries, such as automotive, manufacturing, and oil and gas.
25.10.2021Epoxy resin is a type of thermoset resin commonly used in glue, paint and composite materials. NIMS and ISMA have developed a new thermoset plastic recycling system capable of easily decomposing epoxy resins in an aqueous solution of a naturally derived peptide.
22.10.2021Carbon dioxide is driving climate change. To combat it, emissions must be reduced. Fraunhofer researchers have developed an approach to use the climate gas as a raw material for plastics.
18.10.2021New research from Cornell University aims to ease the process of chemical recycling – an emerging industry that could turn waste products back into natural resources by physically breaking plastic down into the smaller molecules it was originally produced from.
12.10.2021Sustainability is an important issue in business and industry these days. Many companies recognize the need to find the best possible climate-neutral solutions for manufacturing their products and reduce their output of pollutants. This means they are looking for manufacturing options that do not require the use of fossil raw materials.
06.10.2021The idea of biodegradable plastics sounds good at first. However, very little is known about how they are degraded in the soil and how this is influenced by climate change. In two recent studies, soil ecologists have shown which microbial community is responsible for degradation, what role the climate plays in this process, and why biodegradable plastics could still be problematic.
05.10.2021Sunlight was once thought to only fragment plastics in the marine environment into smaller particles that chemically resemble the original material and persist forever. However, scientists more recently have learned that sunlight also chemically transforms plastic into a suite of polymer-, dissolved-, and gas-phased products.
28.09.2021Technical and Marketing Manager, Dover Chemical Corporation
21.09.2021The demand for skilled workers in the so-called MINT professions is constantly increasing. The plastics industry is also feeling the effects of this. PlasticsEurope's declared goal is therefore to promote STEM education in schools.
15.09.2021An interdisciplinary team of researchers has developed a powerful mathematical modelling tool that will allow researchers to predict the properties of polymer networks before they are even created.
24.08.2021General conditions for chemical and materials companies are changing rapidly. But the thorough research, development and commercialization of new materials can be lengthy. AI can accelerate this process.
22.07.2021CEO Braskem Netherlands BV & Vice President Olefins/Polyolefins Europe and Asia
05.07.2021Scientists have devised a novel way of tackling the mounting issue of plastic pollution – by using bacteria to transform plastic waste into vanilla flavoring
15.06.2021Small pieces of plastic are everywhere, stretching from urban environments to pristine wilderness. Left to their own devices, it can take hundreds of years for them to degrade completely.
15.06.2021An international research team led by members from the Technical University of Munich, the Deutsches Museum, Munich, and the Swedish Linköping University has developed a method to manufacture two-dimensional polymers with the thickness of a single molecule. The polymers are formed on a surface by the action of light. The discovery paves the way to new ultrathin and functional materials.
14.06.2021In general, plastics are processed at way over a hundred degrees Celsius. Enzymes, by contrast, cannot usually withstand these high temperatures. Researchers at the Fraunhofer IAP have managed to reconcile these contradictions: They are able to embed enzymes in plastics without the enzymes losing their activity in the process. The potentials this creates are enormous.
09.06.2021Instructions for the production of artificial cow horn. Almost 500 years old is the recipe for the production of artificial horn and thus currently the oldest known German recipe for plastic.
03.05.2021The snow may be melting, but it is leaving pollution behind in the form of micro- and nano-plastics according to a McGill study that was recently published in Environmental Pollution. The pollution is largely due to the relatively soluble plastics found in antifreeze products (polyethylene glycols) that can become airborne and picked up by the snow.
01.04.2021Plastic is ubiquitous in people's lives. Yet, when plastic-containing items have fulfilled their missions, only a small amount is recycled into new products, which are often of lower quality compared to the original material. And, transforming this waste into high-value chemicals requires substantial energy.
01.03.2021Milliken & Company, a global diversified manufacturer with more than a century and a half of materials science expertise, has formally acquired Zebra-chem GmbH, a global chemicals company known for its peroxide and blowing agent masterbatches.
31.01.2021The toilet may be inside the house, but it directs everything that is disposed in it, eventually, into the environment. Therefore, the toilet is not part of the municipal waste collection system.
21.12.2020Restrictions have been imposed to prevent the spread of the SARS-CoV-2 virus. Wearing a mouth and nose mask is part of this, as is avoiding and reducing social contact and maintaining safe distances up to more far-reaching quarantine measures. Where it is difficult to keep a distance, plastics fulfil a key barrier and protective function.