08.06.2023A Collaboration project involving BASF, Krones, SÜDPACK, and TOMRA gives proof of concept for closed recycling loop for PET-based multi-layer packaging.
01.06.2023Borealis introduces the Bornewables™ line of Queo™, a range of plastomers and elastomers based on renewable feedstock. The introduction follows the International Sustainability and Carbon Certification (ISCC PLUS) of Borealis' production site for the Queo™ portfolio, in Geleen, the Netherlands.
12.05.202356 entries, 10 winners, 1 special prize and 1 honourable mention - that's the positive balance of the PackTheFuture Award 2023. The results were announced at the award ceremony at interpack in Düsseldorf. The award honours innovative and sustainable packaging solutions made of plastic.
04.05.2023Researchers at the Fraunhofer Institute have developed an environmentally friendly process to remove fragrances from plastic packaging. The process is based on pressurized water extraction and removes the fragrance limonene from HDPE packaging. By evaluating the data using machine learning methods, it was possible to optimize the extraction parameters.
24.04.2023Plastic pollution is a serious threat to human health and the environment. After years of awareness-raising, there is strong and widespread alignment on the need to act. This was the unmistakable and welcome message from the U.N.'s first negotiating session on a global agreement to end plastic waste in December.
21.04.2023The share of recycled material in plastic products is growing. The exception: food packaging. The requirements for the quality of the material for food contact are high, but in the case of recyclates there is still often a lack of corresponding information today. The project COPPA wants to create transparency in this area – with an open digital platform.
20.04.2023Project STOP, co-funded by Borealis and Systemiq, has created positive social and environmental impact in three cities in Indonesia, including the launch of the scale-up programme Project STOP Banyuwangi Hijau from Muncar into the Banyuwangi Region.
29.03.2023Cardboard dominates parcel logistics. Shrinkage and return transport costs have so far been too big hurdles for reusable containers made of plastic, even though there is a lot to be said for them in terms of sustainability. BOOXit overcomes these hurdles – and adds one on top: the reusable system is not only sustainable, but also robot-compatible.
20.03.2023The two companies LyondellBasell and KIRKBI signed an agreement to make an investment in the company APK. APK has developed the unique solvent-based Newcycling® process, which separates the different polymers of multi-layer packaging materials and produces recycled materials with a high degree of purity suitable for new packaging materials.
15.03.2023Plastic packaging made from recycled material? Yes, but please as high quality as possible – and recyclable! This poses great challenges for manufacturers, because the use of recycled materials still often leads to downcycling. One key to more sustainable plastic packaging lies in digitalisation. This is also where the KIOptiPack project comes in.
01.03.2023Both healthcare and life sciences applications – ranging from drug delivery devices, wellness and wearable devices, to single-use containers for biopharmaceutical manufacturing – all have one thing in common. They must be tough and durable and able to withstand everyday use while maintaining their structural integrity.
21.02.2023SABIC, a global leader in the chemical industry, collaborates with Scientex in the packaging value chain to enable the manufacturer to develop material for the world’s first flexible food packaging made based on advanced recycled OBP, using SABIC® certified circular polypropylene (PP). The material is being used in a premium brand noodles packaging sold in Malaysia.
21.02.2023Imballaggi Alimentari, an Italian based company specialized in the production of ice cream packaging, has launched the Remaxigel boxes made of Styropor® Ccycled™. The boxes made of EPS (expandable polystyrene) boast excellent performance and were primarily designed for artisanal ice-cream shops.
06.02.2023Woven sacks are made of a single polymer family and are therefore already quite easy to recycle. Sustainability requirements for packaging products have increased worldwide and at the same time the need to develop better packaging products to protect the packed commodity has also gained further importance.
23.01.2023BASF SE and StePac Ltd. have joined forces to create the next generation of sustainable packaging specifically for the fresh produce sector. Supplying StePac with its Ultramid® CcycledTM, a chemically recycled polyamide 6, BASF will provide its partner greater flexibility to advance contact-sensitive packaging formats to a higher sustainable standard within the circular economy.
04.01.2023Niaga®, an innovation venture of Covestro, is the winner of the 2022 European Institute of Innovation and Technology (EIT) Community Circular Economy Prize in the Digital Products Passports (DPP) category. The EIT Circular Economy Community awards relevant start-ups and SMEs (small and medium sized enterprises) with significant new solutions accelerating the circular economy.
21.11.2022The company Covestro AG has developed a new heat-resistant coating for use on mono-material stand-up pouches made with SABIC's PE/BOPE technology. The coating facilitates high-speed industrial production of stand-up pouches made with SABIC® BOPE biaxially oriented polyethylene. The new solution enables simpler, single-stream recycling.
26.10.2022The company tesa® supports the field of sustainability. The new tesa® 60412 packaging tape has a backing made of 70% recycled PET and a water-based acrylate adhesive system. The production process is completely solvent-free. Used PET products are recycled and used as raw material for the backing material.
03.10.2022A new technology from Covestro weakens the bond strength of PU adhesives. Laminated films in multilayer packaging can be separated after use and the individual materials can be recycled later. At the K 2022 trade fair, the team will be presenting the technology to the plastics industry for the first time.
20.09.2022Packaging materials are often not very sustainable. This is partly because they are only designed for single-use transport. Researchers in the Fraunhofer LBF's Plastics department have taken this fact as an opportunity to develop an alternative. With their recyclable reusable transport solution for sensitive goods, the climate, the environment and resources can be protected.
12.09.2022Researchers at the Manchester Institute of Biotechnology (MIB) have developed a new enzyme engineering platform. The focus is on plastic-degrading enzymes that can be improved through directed evolution. To test their platform, they engineered a new enzyme, HotPETase, through the directed evolution of IsPETase.
08.09.2022Carbon atoms in mixed waste can replace all fossil raw materials in the production of new plastic. Researchers at Chalmers University of Technology in Sweden are demonstrating this with a new thermochemical recycling method. It is modeled on the natural carbon cycle and could eliminate the impact of plastics on the climate or even clean the air of carbon dioxide.
16.08.2022With the Packaging Act, Germany is taking a further step towards an all-encompassing raw material cycle for packaging. One of the requirements aims to significantly increase the amount of recyclable packaging. Packaging used in mail order or "dispensed" for to-go products has recently been required to be registered in the LUCID Packaging Register.
08.08.2022LyondellBasell (NYSE: LYB) is participating in the NEXTLOOPP initiative, which aims to produce circular recycled food-grade polypropylene (FGrPP) from used packaging. NEXTLOOPP is able to close the loop of polypropylene (PP) by means of a combination of cutting-edge technologies. Polypropylene is separated from the rest and the polymer is decontaminated.
02.08.2022Those who work meticulously to design a product can hardly await the day they can hold the finished item in their hands. Alpla is a company headquartered in Hard, Austria, that speeds up this process. Customers can convert their ideas into reality and ideally leave Alpla's STUDIOa with a prototype in hand.
29.06.2022Thermoforming is a process that requires various tool systems. Unfortunately, if the latter originate from different manufacturers, they often cannot be used together in one system. Illig took on the challenge and came up with a successful solution.
21.06.2022SK chemicals is planning a Realization of zero waste with Ecozen reusable cups that are used and returned. 5,000 so called Dodori cups used in this project are made from Ecozen.
09.05.2022The two companies Brüskem and Sojitz cooperate within a partnership to produce and market the bioMEG (monoethylene glycol) and bioMPG (monopropylene glycol). This joint venture aims to promote sustainable development and combine the expertise of both companies.
25.04.2022Scientists have characterized an enzyme that has the ability to degrade terephthalate (TPA), one of the chemical building blocks of the plastic polyethylene terephthalate (PET), which is used to make disposable beverage bottles, for example.
24.03.2022A project for circular economy by Austria's school milk producers and the three Upper Austrian companies PET-MAN, Greiner Packaging, and Starlinger viscotec has received the WorldStar Award from the World Packaging Organization. Schools are supplied with dairy products in rPET cups that are recycled after use.
09.03.2022SIG's SIGNATURE FULL BARRIER packaging material is made from renewable, forest-based materials and responsible sources. The small amount of polymers used is certified. The Australian company Massel is now launching products in these SIG-Carton Packs.
07.03.2022Salmon fillets from Bömlo are supplied in the world's first EPS fish box. Ccycled is made from chemically recycled plastic and BASF, Vartdal Plast and Bremnes Seashore, the partners for this joint project, are contributing to making the circular economy a success.
01.03.2022By modifying carbon-hydrogen bonds, chemists from the University of North Carolina at Chapel Hill transform plastic trash into tougher, stronger material. They started with plastic foam packaging used to protect electronics during shipping that otherwise ends up in landfills.
07.02.2022Profine GmbH is the first profile system provider to use polyethylene (PE) packaging foils that consist of 80 percent PCR standard and are interested in making supply chains more environmentally friendly.
06.12.2021The digital economy can help us prevent packaging waste, say researchers at Lancaster University and University of St Andrews, who are working with the founders of Reath, a start-up business based in Edinburgh, with a mission to build the digital infrastructure for reuse.
27.10.2021Researchers at the University of Göttingen have developed a new method to create environmentally friendly bioplastics from renewable raw materials.
03.09.2021A breakthrough by researchers at the University of South Florida (USF) and collaborating institutions around the world could pave the way for better products, such as improved batteries, automobile paint and cellphone screens.
23.08.2021To synthesize plastic, small monomer molecules need to be strung together like beads in a necklace, creating long polymer chains. However, not all plastics – or their polymers – are created equal. The longer and stronger the polymer, the more durable the material. Cornell researchers took a middling monomer and, by using a special catalyst, they created a tougher polymer that can form long chains.
08.07.2021We love plastic. It is versatile, lightweight, durable – and sustainable, as long as it gets recycled or reused. Carelessly discarded in nature, (disposable) plastic products not only give the material a bad image, but above all lead to massive environmental problems. This is precisely the issue that Canadian artist Benjamin Von Wong has addressed.
05.07.2021Researchers have created a plant-based, sustainable, scalable material that could replace single-use plastics in many consumer products.