The future of plastics: JKU Linz trains the plastics engineers of tomorrow
01.03.2023
Plastics must be newly thought and designed - that is the credo at the Johannes Kepler University in Linz. From autumn 2023, courses on plastics technology will be offered here. Plastics don't just play a supporting role there, they are the star of the show. Because they are a key factor for both the present and the future.
Plastics industry meets Metaverse: igus presents products in virtual reality
31.01.2023
Studies show that we are up to nine times more likely to remember something we have experienced in virtual reality. This knowledge can also be interesting for the plastics industry. With the iguversum, igus has created a digital space in which the manufacturer's products can be discovered. In the future, engineering projects will also be carried out there.
Sumitomo (SHI) Demag joins the R-Cycle Community
16.01.2023
With 80.000 all-electric machines in operation around the globe, Sumitomo (SHI) Demag’s strong focus is on the sustainable and resource saving operation of injection molding machines in the plastic processing industry.
ENGEL launches Pay per Use
09.01.2023
ENGEL breaks new ground in injection moulding machine distribution. Blazing a trail for its industry, the machine manufacturer now offers its customers a pay-per-use model on top of classical machine purchases. This helps processors to reduce their investment risk while at the same time boosting flexibility in production.
EREMA: "PredictOn:Drive", a new tool for predictive maintenance
04.11.2022
Real-time visualisation of process and machine data holds great potential for the circular economy as a whole and for recycling processes in particular. At K 2022 EREMA launched "PredictOn:Drive", a predictive maintenance application for its recycling machines.
Machine communication: OPC UA as the linguistic basis
04.10.2022
Communication is key, and this also applies to machines, since the ability of machines to communicate has economic advantages. However, this first requires a common linguistic basis, because then the machines can be used particularly efficiently.
Sustainability by digitalization: Inventory machines become capable of communication
13.09.2022
What's old is far from bad. This also applies to machines - however, they are often not capable of communicating. Yet it is precisely this ability that is of interest when it comes to evaluating data or correcting errors. Injection molding machine manufacturer Steinl has found a way to connect even older machines to a communication network.
Augmented Reality in the plastics industry: individualized instructions for the entire product life cycle
25.08.2022
Individualization is the trend. In the plastics industry, too, more and more individualized machines are coming onto the market. Of course, these machines also require individualized manuals with instructions tailored specifically to them. However, this is not yet a reality today. The AdaptAR project wants to change that – with the help of Augmented Reality and an app.
Photosynthesis-inspired process makes commodity chemicals
18.07.2022
A Northwestern University research team used a new method to convert acetylene to ethylene, a widely used, highly valuable chemical that is an important component of plastics. They use a process similar to photosynthesis that is much less expensive and less energy intensive.
North American plastics sector holds steady, while riding a roller-coaster of uncertainty
08.07.2022
The pandemic. Supply chain ruptures. The Great Resignation. China trade tensions. Climate change and extreme weather events. Soaring inflation. Stock market volatility. The war in Ukraine. Seldom in our lifetimes have we experienced such an extended period of disruption and uncertainty.
Solvay extends its sustainable polymer offering for smart devices and wearables
21.06.2022
Solvay launched the Kalix® 10000 series, a partially bio-based material made with renewable feedstock from non-food competing sources, is produced with 100% renewable electricity.
App, AI, data glasses: digital toolbox for the plastics industry is well filled
28.02.2022
We live in a world in which processes are becoming increasingly complex. This also applies to the plastics industry. One way to support people in production with their demanding tasks is through digital tools – and not only on site at the plant, but also remotely. The increasing amount of data also contributes to predictive maintenance of machines.
Breakthrough in separating plastic waste
21.02.2022
With a new technology it is possible to analyse and categorise the type of plastic by using a hyperspectral camera in the infrared area and machine learning. The technology makes it possible to separate plastics based on a purer chemical composition than is possible today, and this opens up for completely new opportunities to recycle plastics.
Researchers seek to re-use waste plastics to make valuable petrochemicals
14.02.2022
With a new method West Virginia University engineers upcycle single-use plastic packaging into petrochemicals. The produced ethylene and BTX aromatics from plastic upcycling can be used as feedstocks to re-make plastics.
Neste and Ravago plan to set up a joint venture to focus on chemical recycling of waste plastic
14.02.2022
Neste and Ravago intend to establish a joint venture to build an industrial chemical recycling facility in the North Sea port of Vlissingen, the Netherlands. From there, global chemical recycling activities will be managed, building on the further development of thermochemical liquefaction technology by U.S.-based Alterra Energy, an innovative chemical recycling technology company.
DarWIN research project accelerates multi-manufacturer machine learning
07.02.2022
New AI-based process optimisation tools have been developed specifically targeting injection moulding machines. Plus10 and the SKZ performed a series of thorough AI pilot tests on Sumitomo (SHI) Demag machines.
The many ways that 'going digital' is changing manufacturing
23.08.2021
There are many aspects and forms of digitalization in manufacturing, ranging from Industry 4.0, the Internet of Things (IoT), artificial intelligence and additive manufacturing, to augmented and virtual reality, 5G connectivity, mobile apps, blockchain technology, and more.
Soft robots: smart elastomers are making the robots of the future more touchy-feely
19.07.2021
Imagine flexible surgical instruments that can twist and turn in all directions like miniature octopus arms, or how about large and powerful robot tentacles that can work closely and safely with human workers on production lines.
Industry 4.0: "We should seize opportunities and create added digital value"
04.05.2021
The COVID-19 pandemic has accelerated the rise of the digital workplace. This also applies to industry in general, where massive amounts of data are collected from countless sources. The so-called Fourth Industrial Revolution (or Industry 4.0) aims to use this data to gain actionable insights and target the development of marketable products, technologies, and services.
Connecting apprentices with plastics companies
30.03.2021
Preparing small and medium-sized plastics manufacturing enterprises for the challenges of digitization in the vocational training and continuing education of employees and apprentices – that was the objective of the project titled "Kunststoff goes Future", abbreviated KungFu. The project ran for three years in the Ostwestfalen-Lippe district, Germany. It was successfully completed in mid-2020.
Identification of off-odours in polymers
25.08.2020
There are limits to the use of olfactorily contaminated plastics for the production of fresh materials. Odorous contamination of them needs to be minimised so that they are suitable for manufacturing new plastic products. A combination of analytical and sensor technology can help to identify olfactory contaminants and to check the efficiency and effectiveness of cleaning processes.