Menu

Image: Plant for the production of cars. On the right, several car models; Copyright: traimakivan

Borealis launches portfolio of circular plastomers and elastomers based on renewable feedstock

01/06/2023

Borealis introduces the Bornewables™ line of Queo™, a range of plastomers and elastomers based on renewable feedstock. The introduction follows the International Sustainability and Carbon Certification (ISCC PLUS) of Borealis' production site for the Queo™ portfolio, in Geleen, the Netherlands.
Read more
Image: Machines for the production of various plastics in a large hall; Copyright: saoirse2010

Faster mould set-up – more efficient production

01/06/2023

ENGEL helps injection moulding processors optimize product changeover times through customized training and technologies such as the Setup wizard to achieve higher productivity, lower unit costs and more profit.
Read more
Image: Fixation of electric cables in front of bluish background; Copyright: photocreo

LAPP uses new bio-based plastic from BASF – Organic ETHERLINE® now available too

18/05/2023

The company LAPP is using a new bio-based plastic from BASF for the sustainable version of its ETHERLINE® FD P Cat.5e for Industrial Ethernet. The bio-based plastic is Elastollan® N, the thermoplastic polyurethane from BASF, which is part of its circular economy strategy.
Read more
Image: Plastic pallet in orange; Copyright: trans-o-flex

Logistics: eco-friendly and economical transport with plastic pallets

16/05/2023

Eight to ten times on average a wooden pallet is used in the handling area of logistics before it shows a defect and has to be sorted out. This is neither particularly economical nor good for the environment. Pallets made of plastic offer a more sustainable solution.
Read more
Image: Headset headphones resting on a laptop. In the background a phone; Copyright: BrianAJackson

Covestro expands its range of more sustainable polycarbonates

11/05/2023

Covestro AG offers a polycarbonate with a 90 percent recycled content of plastic from post-consumer waste (PCR) that can be used in consumer electronics, among other applications. The company is collaborating with Jabra on the Evolve2 headset and making progress on climate-neutral solutions through mass balancing.
Read more
Photo: Lab technician wearing protective goggles, a smock and gloves working with the process of Interface Polymers' technology; Copyright: Evonik Industries AG

High-performance additives for sustainable plastics: Evonik invests in Interface Polymers

04/05/2023

Evonik Industries AG has invested in the British company Interface Polymers Ltd. This investment from the Sustainability Tech Fund strengthens Evonik's position in sustainable products and recycling processes. Interface Polymers' technology enables easier processing and recycling of plastics.
Read more
Image: Chemical complex with numerous pipes; Copyright: scalatore1959

BluCon Biotech welcomes strategic investment by major chemical group LG Chem

27/04/2023

The two companies BluCon Biotech GmbH and LG Chem Ltd entered into an investment agreement. Together, they plan to work on a novel process to convert lignocellulosic non-food raw materials into high-purity lactic acid.
Read more
Image: Inside a plastic recycling plant; Copyright: Shutterstock/Nordroden

A status check on the UN's plastic waste agreement

24/04/2023

Plastic pollution is a serious threat to human health and the environment. After years of awareness-raising, there is strong and widespread alignment on the need to act. This was the unmistakable and welcome message from the U.N.'s first negotiating session on a global agreement to end plastic waste in December.
Read more
Image: Flag of Kazakhstan; Copyright: SteveAllenPhoto999

Central Asia Plast World in Kazakhstan from 28 to 30 September 2023

24/04/2023

Kazakhstan is the most economically advanced country in Central Asia and plans to increase industrialization, which will increase plastics consumption. Central Asia Plast World is the most important business platform for plastics and rubber in Central Asia and will be held in Almaty in September 2023.
Read more
Image: Black dashboard in car with large display; Copyright: FabrikaPhoto

Covestro expands production capacity for polycarbonate films in Thailand

20/04/2023

The company Covestro plans to further increase its global production capacity for polycarbonate (PC) specialty films by starting to build new extrusion lines at the Map Ta Phut Industrial Park in Thailand. The completion is planned by 2025 and the investment is in the higher double-digit million euro range.
Read more
Image: Four large waste recycling garbage cans on the street; Copyright: AZ-BLT

Project STOP marks major milestones and expands waste collection services to over 300,000 people

20/04/2023

Project STOP, co-funded by Borealis and Systemiq, has created positive social and environmental impact in three cities in Indonesia, including the launch of the scale-up programme Project STOP Banyuwangi Hijau from Muncar into the Banyuwangi Region.
Read more
Image: Pressed plastic bales in the modern hazardous waste processing plant; Copyright: hiv360

A wholly sustainable plastics economy is feasible

13/04/2023

In a study under the leadership of the ETH Zurich, the scientists point out that plastic products must be better aligned with the circular economy in future. The study finds that circular plastics are feasible within planetary boundaries. This would require at least 74 percent of the plastic to be recycled.
Read more
Image: Dark 3D printer prints a model from black plastic; Copyright: iloli

Additive manufacturing is pioneering for Röchling Industrial

12/04/2023

Röchling Industrial integrated the Röchling Direct Manufacturing Center from Waldachtal into the Röchling Industrial Laupheim at the Burgrieden site. The international plastics processor takes an important step in the industrialization of its 3D printing competencies and continues to focus on additive manufacturing.
Read more
Image: Numerous pressed PET bottles ready for recycling; Copyright: duallogic

First PET Bottle-to-Bottle Recycling Line in Kenya

12/04/2023

Megh Group company T3 (EPZ) Limited is going to install the first PET recycling system for bottle-grade rPET and resin in Kenya and Eastern Africa, a Starlinger recoSTAR PET 165 HC iV+ recycling line, in Athi River just outside Nairobi.
Read more
Image: Various red and white towers of a factory. Emissions escape from the one on the right; Copyright: freedomnaruk

LANXESS software calculates carbon footprint for Group's own products

05/04/2023

With the "Product Carbon Footprint Engine" developed by LANXESS, the CO2 footprint can be calculated automatically for the Group's products. With this innovation, the speciality chemicals company aims to help its customers achieve their sustainability goals.
Read more
Image: K China Symposium; Copyright: Messe Düsseldorf

The first edition of K China Symposium was successfully held on 23rd March 2023. Expectations were achieved!

30/03/2023

The first edition of the K China Symposium was successfully held at the Shanghai International Convention Centre on 23 March 2023. Participants praised the opportunity for professional exchange, business expansion and inspiration offered by this new, international platform.
Read more

ArabPlast 2023 from 13 to 15 December 2023 in Dubai

22/03/2023

Read more
Image: Two workers in white protective clothing. In the background: chemical production; Copyright: seventyfourimages

LyondellBasell and KIRKBI invest in APK to develop recycling technology

20/03/2023

The two companies LyondellBasell and KIRKBI signed an agreement to make an investment in the company APK. APK has developed the unique solvent-based Newcycling® process, which separates the different polymers of multi-layer packaging materials and produces recycled materials with a high degree of purity suitable for new packaging materials.
Read more
Image: Rubber shoe soles in different colors; Copyright: abraham_stokero

Covestro to build its largest TPU site in China

20/03/2023

The company Covestro will build its largest Thermoplastic Polyurethanes (TPU) site in Zhuhai, China. The TPU site will be built in three phases. The first phase will be completed in late 2025 and the final phase in 2033.
Read more
Image: Interior wiring and cabling with several colorful cables and wires; Copyright: Mint_Images

Borealis Borcycle™ C chemical recycling provides circular solutions for crosslinked polyethylene for the Wire & Cable and Infrastructure sectors

13/03/2023

The company Borealis is using its Borcycle™ C chemical recycling process to recycle crosslinked polyethylene (PE) types into recycled polyethylene. The EverMinds™ approach provides innovative and viable solutions to recycling challenges in the Wire & Cable and Infrastructure industries.
Read more
Image: Fishing nets on the beach; Copyright: KraussMaffei

From the sea into the tunnel: KraussMaffei customer Oldroyd uses 100% sea plastics for its products

06/03/2023

What do a tunnel and hiking boot have in common? Both have a membrane that prevents the ingress of rain. In the case of the tunnel, the Norwegian company Oldroyd is an expert for the membrane and its injection-molded fixing product. It uses CX machines from KraussMaffei and 100% sea plastics.
Read more
Image: PEX pipe production at Uponor. Copyright: Uponor

Neste, Uponor, Wastewise Group and Borealis enable chemical recycling of hard-to-recycle plastic waste into new high-quality plastic pipes

06/03/2023

Neste, Uponor, Wastewise and Borealis have successfully produced pipes made of cross-linked polyethylene (PEX) which was based on feedstock gained from chemically recycled post-industrial waste plastic from PEX pipe production, using an ISCC PLUS certified mass-balancing approach. The partner companies believe this project is among the first implementations of chemical recycling of PEX.
Read more
Image: blue liquid in test tubes; Copyright:  wichayada69

LANXESS and TotalEnergies to cooperate on sustainable styrene

01/03/2023

Specialty chemicals company LANXESS and French energy group TotalEnergies have entered into a cooperation on the supply of biocircular styrene. Unlike conventional styrene, the raw material used by TotalEnergies is based on tall oil, which is derived from a tree resin and is a by-product of pulp production.
Read more
Image: light-blue bottles made from plastic; Copyright: Covestro

Covestro: New ultra-durable material solution for healthcare and life sciences

01/03/2023

Both healthcare and life sciences applications – ranging from drug delivery devices, wellness and wearable devices, to single-use containers for biopharmaceutical manufacturing – all have one thing in common. They must be tough and durable and able to withstand everyday use while maintaining their structural integrity.
Read more
Image: Gloved hands pick up plastic bottle on the beach; Copyright: maxbelchenko

SABIC enables Scientex in developing worlds first PP flexible food packaging using PCR ocean bound plastic

21/02/2023

SABIC, a global leader in the chemical industry, collaborates with Scientex in the packaging value chain to enable the manufacturer to develop material for the world’s first flexible food packaging made based on advanced recycled OBP, using SABIC® certified circular polypropylene (PP). The material is being used in a premium brand noodles packaging sold in Malaysia.
Read more
Image: To-go packaging made of Styropor; Copyright: BASF

Ice Ice Baby! Sustainably packaged with Styropor® Ccycled™ by BASF

21/02/2023

Imballaggi Alimentari, an Italian based company specialized in the production of ice cream packaging, has launched the Remaxigel boxes made of Styropor® Ccycled™. The boxes made of EPS (expandable polystyrene) boast excellent performance and were primarily designed for artisanal ice-cream shops.
Read more
Image: two men sitting in an easter-asian boat filled with plastic bottles; Copyright: tide ocean material

Back to the cycle: #tide turns ocean plastic into high-quality recyclates

15/02/2023

Plastic is a resource without which our life today would not be possible - and thanks to recycling, we can even use it several times over. However, we know from reports what can happen if the recycling process does not run properly: the plastic sometimes ends up in the sea. Getting it back into circulation from there and turning it into a usable product is not easy.
Read more
Image: a man watching Covestros plant for chlorine electrolysis; Copyright: Covestro

Covestro and Lanxess cooperate to produce more sustainable raw materials with reduced CO₂ footprint

14/02/2023

Chemical companies Covestro and LANXESS are cooperating in the energy-intensive production of basic chemicals at their Lower Rhine sites in Germany and make them more climate friendly. LANXESS procures chlorine, caustic soda and hydrogen from the ISCC PLUS-certified sites of Covestro in Leverkusen and Krefeld-Uerdingen.
Read more
Image: Man with VR glasses; Copyright: seventyfourimages

Plastics industry meets Metaverse: igus presents products in virtual reality

31/01/2023

Studies show that we are up to nine times more likely to remember something we have experienced in virtual reality. This knowledge can also be interesting for the plastics industry. With the iguversum, igus has created a digital space in which the manufacturer's products can be discovered. In the future, engineering projects will also be carried out there.
Read more
Photo: female hands tying sports shoes; Copyright: YuriArcursPeopleimages

From old to new: Evonik produces PEBA from used tires

03/01/2023

Many raw materials deserve a second life, and especially in view of resource conservation and the circular economy, the reuse of raw materials is particularly important. Evonik shows how it's done: The company produces PA-12 elastomers from old tires.
Read more
Photo: woman picking a 3D printed object from the printer; Copyright: Cubicure

All tidied up: Customizable cleaning solution for light-based 3D printing

21/12/2022

As the saying goes, one cannot make an omelette without breaking eggs – in a metaphorical sense, this is also the case when it comes to the 3D printing process. In most cases, material residue must be removed manually and then discarded. Cubicure delivers a different way that's automated, customizable, and sustainable.
Read more

Building and construction sector: An industry relies on plastics

08/11/2022

Polymers are as diverse as their chemical composition. Plastics come in hard, soft, flexible, brittle, opaque, transparent - just as required. They impress with their durability, cost-effectiveness, impermeability to water, high formability, corrosion resistance and low weight. This makes them the ideal building material - and an environmentally friendly alternative to other materials.
Read more
Photo: woman picking a shampoo bottle at a store; Copyright: vladdeep

Rebirth for shampoo bottles & co: launch of the first deposit system for plastic packaging from the bathroom

02/11/2022

The demand for high-quality recyclates has exceeded the supply on the market for years. So far, too much high-quality plastic is still being burned as waste instead of being recycled. The Berlin-based start-up Circleback wants to change that by setting up a deposit system for plastic packaging from the bathroom.
Read more
Photo: wind turbines on the ground; Copyright: Fraunhofer IWES_Fraunhofer WKI

No longer gone with the wind: Fraunhofer Institute develops concepts for rotor blade recycling

28/10/2022

After about 25 years, the rotor blades of a wind turbine have usually had their day. But what happens to them then? Together with the Institute for Energy and Circular Economy (IEkrW), the Fraunhofer Institute for Wind Energy Systems (IWES) is developing concepts in a project that should enable rotor blades to be better recycled and reused.
Read more
Photo: man with white helmet and laptop in suit talking with man in work clothes and blue helmet. In the background various machines; Copyright: seventyfourimages

Machine monitoring: performance data via app at any time

26/10/2022

Steinert.view® is a flexible and reliable monitoring solution for STEINERT sensor-based sorting machines. Performance data collected is visualized in a web app so that operators can see at a glance whether machines are currently producing, whether there are changes in production, or whether there is potential for optimization.
Read more

The countdown to K 2022 is on

13/10/2022

The set-up for K 2022 at the Düsseldorf Trade Fair is in full swing. The trade fair's logistics team is making sure that everything runs smoothly. Werner Arnold, Team Manager Logistics, explains in an interview all the things that need to be taken into account until all the halls at K are filled.
Read more

Full view: Transparent tool enables insight into filling processes of particle foams

11/10/2022

The filling of a mold determines the quality of the resulting molded part. But what if insight into the filling process of particle foams is not available and thus control is lacking at this crucial point in the production process? A new transparent experimental mold made of acrylic glass developed by Neue Materialien Bayreuth (NMB) has put an end to this dilemma.
Read more
Image: Close up of small hand with pacifier; Copyright: Daria_Nipot

Collaboration between Borealis, Neste and MAM brings new soother to market made with renewably-sourced feedstock

11/10/2022

The MAM company is accelerating circular economy measures in partnership with Borealis through the launch of MAM Original Pure pacifiers and packaging enabled by Borealis Bornewables™ portfolio of recyclable polyolefins. Upstream value chain partner Neste is the supplier of renewable feedstock Neste RE™ based on waste and residue streams for the manufacture of Bornewables polypropylene.
Read more

Machine communication: OPC UA as the linguistic basis

04/10/2022

Communication is key, and this also applies to machines, since the ability of machines to communicate has economic advantages. However, this first requires a common linguistic basis, because then the machines can be used particularly efficiently.
Read more
Image: cutout of a confectionery factory employee wearing blue gloves. In front of him a sealing box with packaging film; Copyright: seventyfourimages

Innovative technology makes flexible packaging recyclable

03/10/2022

A new technology from Covestro weakens the bond strength of PU adhesives. Laminated films in multilayer packaging can be separated after use and the individual materials can be recycled later. At the K 2022 trade fair, the team will be presenting the technology to the plastics industry for the first time.
Read more
Image: Chemical factory. Blue sky in the background; Copyright: chuyu2014

BASF and ARCUS sign agreement on the production and procurement of pyrolysis oil from mixed plastic waste

03/10/2022

ARCUS plans to start up first commercial pyrolysis plant for mixed plastic waste in Germany and will supply the company BASF SE with pyrolysis oil. This will enable further expansion of BASF's ChemCyclingTM business. The Agreement foresees take-up of up to 100,000 tons of pyrolysis oil per year.
Read more
Image: Mechanical gripper in front of a mountain of waste; Copyright: nualaimages

Covestro invests in the production of more sustainable polycarbonates in Asia Pacific

19/09/2022

Covestro plans to set up its first dedicated mechanical recycling (MCR) plant for polycarbonates at its integrated site in Shanghai. The company also plans to convert an existing compounding facility in Thailand into a mechanical recycling plant.
Read more
Image: Chemical plant at dusk with light and smoke; Copyright: CreativeNature_nl

LANXESS: Entire value chain to become climate-neutral

12/09/2022

The chemicals company LANXESS aims to make its upstream and downstream supply chains climate-neutral by 2050. In order to achieve the so-called Scope 3 targets, LANXESS has launched the Net Zero Value Chain Program. The focus is on sustainable raw materials, green logistics and climate-neutral products.
Read more

Energy costs and climate protection in industry and commerce: decarbXpo launches

05/09/2022

A lot is happening in the field energy technology, not least as a result of rapidly rising energy prices. Spurred on by falling costs for renewable energy technologies, innovative storage solutions, intelligent energy management systems and new opportunities are also opening up for industrial and commercial companies.
Read more

"My ambition is to further expand the position of K as the most relevant meeting place for the industry worldwide."

02/09/2022

Thomas Franken talks about his expectations for K2022, the challenges the industry faces and what technology is likely to develop in the coming years.
Read more
Image: aerial view of wind turbines on various green areas and fields; Copyright: CreativeNature_nl

BASF enters power agreements for clean energy supply of more than 20 BASF sites across the United States

01/09/2022

The BASF company is focusing on renewable energy in the field of electricity supply in the United States. BASF enables renewable energy projects by signing virtual power purchase agreements (VPPAs) totaling 250 MW. In addition, the amount of solar and wind energy in the grid offsets the energy supply of more than 20 production sites.
Read more

Climate-neutral with a plan – sustainability in the plastics industry

30/08/2022

Successful business means sustainable business. Because according to KraussMaffei, sustainability has both ecological and economic advantages. Recently, the company reaffirmed its goal of being climate-neutral by 2030. Its strategy includes recycling solutions, energy-efficient construction and heating, and sustainable product development.
Read more
Photo: waste separation. Left: Two trash cans. Right: A trash can and a filled trash bag; Copyright:

Public obligations for recycling: Germany – a good role model?

16/08/2022

With the Packaging Act, Germany is taking a further step towards an all-encompassing raw material cycle for packaging. One of the requirements aims to significantly increase the amount of recyclable packaging. Packaging used in mail order or "dispensed" for to-go products has recently been required to be registered in the LUCID Packaging Register.
Read more
Image: Silhouette of the legs of a firefighter fighting the flames; Copyright: ABBPhoto

BASF and THOR GmbH fight fire together

03/08/2022

To improve plastic compounds and meet stringent fire safety requirements, BASF and THOR GmbH are using their joint expertise in flame retardants. The focus is on developing alternatives to halogen-containing additives.
Read more

Product development in Alpla's One-Stop Shop

02/08/2022

Those who work meticulously to design a product can hardly await the day they can hold the finished item in their hands. Alpla is a company headquartered in Hard, Austria, that speeds up this process. Customers can convert their ideas into reality and ideally leave Alpla's STUDIOa with a prototype in hand.
Read more
Image: Building complex of the new KraussMaffei corporate headquarters in Parsdorf; Copyright: KraussMaffei Group GmbH

The "new KraussMaffei" is to be climate-neutral by 2030

25/07/2022

The KraussMaffei company confirms a sustainable corporate strategy: Climate neutrality in eight years. The consistent focus is on Circular Economy. One of the largest roof-mounted photovoltaic systems in Europe is currently being built at the new main plant in Parsdorf.
Read more

Robot to go – igus develops innovative Cobot

12/07/2022

At the heart of any modern robot is a gearbox. Now imagine a robot with its "heart" made of plastic. It’s simply marvelous. But that’s not the only benefit users can expect from the new cobot (collaborative robot) by igus: the device is also lightweight, portable, and affordable.
Read more
Image: Leverkusen Wind Technology Center; Copyright: Covestro

Fresh impulses for wind energy

11/07/2022

Covestro is researching material solutions for sustainable energy generation at its new Wind Technology Center. They are focusing on the optimization and new development of PUR resins in collaboration with customers.
Read more

North American plastics sector holds steady, while riding a roller-coaster of uncertainty

08/07/2022

The pandemic. Supply chain ruptures. The Great Resignation. China trade tensions. Climate change and extreme weather events. Soaring inflation. Stock market volatility. The war in Ukraine. Seldom in our lifetimes have we experienced such an extended period of disruption and uncertainty.
Read more

Using different tools in one flexible thermoforming system

29/06/2022

Thermoforming is a process that requires various tool systems. Unfortunately, if the latter originate from different manufacturers, they often cannot be used together in one system. Illig took on the challenge and came up with a successful solution.
Read more
Image: male hands use smartphone. Left: laptop; Copyright: stevanovicigor

Solvay extends its sustainable polymer offering for smart devices and wearables

21/06/2022

Solvay launched the Kalix® 10000 series, a partially bio-based material made with renewable feedstock from non-food competing sources, is produced with 100% renewable electricity.
Read more

Create a quote for plastic testing services in just minutes

07/06/2022

Plastics are versatile and come in every conceivable shape, size, color, and function. Yet before plastic products can fulfill their desired function, they are subject to testing to confirm they comply with various standards. It takes testing labs hours, if not days, to create a quote for materials testing.
Read more
Image: Man in overalls is painting a car; Copyright: twenty20photos

BASF and BMW Group rely on renewable raw materials for automotive coatings

06/06/2022

The BMW Group is the first automotive manufacturer to use OEM coatings from BASF that are certified according to the biomass balance process. By using new sustainable product variants, around 40% CO2 can be avoided for clear coat and dip coating.
Read more
Image: Man sorts plastic bottles for recycling; Copyright: Wavebreakmedia

Dow, LOVERE, YCJ, and P&G join hands in organizing "Design for Circularity" Art & Design Competition

01/06/2022

The companies Dow (NYSE: DOW), LOVERE, YCJ and Procter & Gamble (P&G) will organize the first "Design for Circularity" art and design competition in China.
Read more
Photo: Airplane on the asphalt; Copyright: Rawpixel

New cutting-edge thermoplastic materials for the aerospace sector

23/05/2022

In the HITCOMP project (High Temperature Characterization and Modelling of Thermoplastic Composites), thermoplastic materials were investigated in the aerospace sector. The researchers concluded that thermoplastic-based components are more efficient than thermosetting plastic composites in terms of their thermal properties.
Read more

Welcome to the family: COLOMBIAPLAST joins the K Global Gate portfolio

12/05/2022

Read more
Image: Plastic bottles standing next to each other; Copyright: twenty20photos

Braskem and Sojitz Corporation join hands to bring renewable MEG technology to the market

09/05/2022

The two companies Brüskem and Sojitz cooperate within a partnership to produce and market the bioMEG (monoethylene glycol) and bioMPG (monopropylene glycol). This joint venture aims to promote sustainable development and combine the expertise of both companies.
Read more
Image: White KN95 face masks FFP2 mask as covid 19 protection lie on top of each other. ; Copyright: jirkaejc

Borealis and Grabher partnership gives used FFP2 face masks another life

09/05/2022

High-quality face masks made in Austria by Grabher contain fully recyclable meltblown polypropylene supplied by Borealis and can be recycled in Austria. The new Partnership between the companies Borealis and Grabher is embodiment of the Borealis EverMinds™ spirit of taking action to accelerate the move towards plastics circularity.
Read more

Training in the plastics industry: technical college and companies get trainees fit for the job

06/05/2022

At 16, did you already know where you wanted to go on your professional journey? With the range of choices available to young people today, it can be difficult to make a decision at first glance. That's why it's beneficial to be taken by the hand and introduced to different professions. Wentus GmbH from Höxter sets a good example.
Read more
Image: Garbage in front of the industry. Smoke comes out of the chimneys; Copyright: thananit_s

thananit_s

Joint Mission: Circular Economy

04/05/2022

The mission of the new "We are plastics" alliance between the three major German Plastics Associations is to promote the circular economy. They focus on the dialog with consumers and NGOs, on the network between individual initiatives and on presenting facts and changes of the industry.
Read more
Image: Equipment and medical devices in the modern operating room; Copyright: nd3000

Solvay partners with Mitsubishi Chemical Advanced Materials to recycle end-of-life medical components

04/05/2022

Medical devices made from Solvay's high-performance thermoplastic Udel® are recycled thanks to a collaboration between Solvay and Mitsubishi Chemical Advanced Materials. Solvay knows how to evaluate the chemistry of the end-of-life polymer, while MCAM has expertise in washing and mechanically cleaning the material.
Read more

School meets business: getting young people excited about the plastics industry

19/04/2022

At 16, did you already know where you wanted to go on your professional journey? With the range of choices available to young people today, it can be difficult to make a decision at first glance. That's why it's beneficial to be taken by the hand and introduced to different professions. Wentus GmbH from Höxter sets a good example.
Read more
Image: SWISS Boeing 777-300ER flying in the sky ; Copyright: SWISS International Air Lines

SWISS equips entire Boeing long-haul fleet with AeroSHARK

11/04/2022

Twelve Boeing 777-300ERs will gradually be fitted by SWISS with the riblet films developed by Lufthansa Technik and BASF. The reduced frictional resistance makes the sub-fleet more economical and lower in emissions, thus reducing the environmental footprint.
Read more
Image: Logo of WITTMAN Group in magenta with white font on gray background ; Copyright: WITTMANN

Change of brand strategy for the WITTMANN Group

04/04/2022

The WITTMANN Group has changed its brand strategy and is aiming for a one-brand strategy instead of the two-brand strategy.
Read more

From the idea to a (sustainable) company: Circular Valley promotes start-ups

11/03/2022

Mentoring in areas such as marketing and sales, direct contact with large companies, and support from industry experts – this is what every start-up dreams of. In the Circular Valley in Wuppertal, Germany, this is reality. Entrepreneurs from a wide variety of fields who want to contribute to the Circular Economy with their work are supported here.
Read more

PERC Solar Cells from 100 Percent Recycled Silicon

07/03/2022

In order to be able to reuse silicon, a working group from the Fraunhofer Institute for Solar Energy Systems ISE and the largest German recycling company for PV modules, Reiling GmbH & Co. KG, have developed a solution, in which the silicon in the discarded modules was recycled on an industrial scale and reused to produce new PERC solar cells.
Read more

Fish in packaging made from chemically recycled plastic

07/03/2022

Salmon fillets from Bömlo are supplied in the world's first EPS fish box. Ccycled is made from chemically recycled plastic and BASF, Vartdal Plast and Bremnes Seashore, the partners for this joint project, are contributing to making the circular economy a success.
Read more

Plastic snowfall in the Alps

21/02/2022

To study how much plastic is trickling down on us from the atmosphere, Empa researcher Dominik Brunner, together with colleagues from Utrecht University and the Austrian Central Institute for Meteorology and Geophysics, have developed a chemical method that determines the contamination of the samples with a mass spectrometer.
Read more

Neste and Ravago plan to set up a joint venture to focus on chemical recycling of waste plastic

14/02/2022

Neste and Ravago intend to establish a joint venture to build an industrial chemical recycling facility in the North Sea port of Vlissingen, the Netherlands. From there, global chemical recycling activities will be managed, building on the further development of thermochemical liquefaction technology by U.S.-based Alterra Energy, an innovative chemical recycling technology company.
Read more

Recycled packaging foils with the "Blue Angel" label

07/02/2022

Profine GmbH is the first profile system provider to use polyethylene (PE) packaging foils that consist of 80 percent PCR standard and are interested in making supply chains more environmentally friendly.
Read more

Bence Körmendi

19/01/2022

Petchem Business Unit Director, MOL Hungarian Oil and Gas Company Plc.
Read more

New market data on the bioplastics market 2021

14/01/2022

The Institute for Bioplastics and Biocomposites presents the new edition of its brochure with the title "Biopolmers - Facts and statistics" to show how the bioplastics market is developing.
Read more

Scientific Council of K 2022 convenes First Meeting

08/12/2021

Renewable energies, resource-saving processes, climate neutrality – rising to major challenges is key. These global tasks require creative minds, innovative technologies and high-performance materials.
Read more

ABOUT US

CONTACT

NEWSLETTER